AUTOMATIC PRODUCTION LINE FOR TABLEWARE ECO BIODEGRADABLE

Application:
Easy to use line designed for creating paper plates, environmentally friendly.
It is used by manufacturing companies.

Functions:
Stable operation is guaranteed by PLC controllers.
Simple to use.
Stable and efficient.
It definitely speeds up the work.

The line consists of:
Hydrapulpter
Mixer
Pump
Self-priming water pump
Vibrating transporter
High pressure pump
Vacuum pump
Compressor
Compressed air tank
Air filter
Forming machine

Technical data of the line:
Capacity: 1500-1800 pcs / h
Material for mass: bamboo mass, wood pulp, straw, paper, cellulose
Material consumption: 30-40 kg / h US 66-88 lb / h
Power: 120-140 kW
Water consumption  : 200-300 L x H
Personal requirements: 6-8 operators
Oil consumption: 0.6-0.8 kg / h US 1-1,8 lb / h

The hydrapulpter is a machine adapted to loosening the material and adapting it for further processing. The machine has been designed in such a way as to avoid the risk of infection, illness, infection. Parts can be cleaned before each use. All surfaces in contact with the product have a smooth surface. The construction of the machine precludes the penetration of the substance into the product.

Technical data:
Model: DY-15L
Capacity: 1.5 m3
Power: 22 kW
Capacity: 120 ~ 180 kg / h US 264-397 lb

The mixer was created to facilitate and speed up the entire production process. Its main task is to mix the previously prepared mass. In addition, the line includes an electrical cabinet responsible for controlling the mass production.

Technical data:
Model: DY-10
Power: 1.5 kW
Diameter: 1000 mm/ 39"

The pump is adapted for mass conversion.

Technical data:
Flow: 65 m3 / h
Power: 5.5 kW

The self-priming water pump allows the water to be passed in to add to the mass or to clean the equipment.
The line is equipped with two such pumps.

Pump 1 technical data:
Flow: 40m3 / h;
Power: 4 kW

Technical data for pump 2:
Power: 1.5 kW
Flow: 15 m3 / h

The vibrating conveyor allows efficient displacement of the mass.

Technical data:
Power: 5.5 kW

High pressure pump for washing molds and tank.

Technical data:
Flow: 12 m3 / h;
Power: 3kW

Vacuum pump

Technical data:
Pressure: 0.08MPa,
Flow: 12 m3 / min
Power: 18.5 kW

Compressor

Technical data:
Capacity: 6.5 m3 / min;
Pressure: 0.8 MPa
Power: 15 kW;

Compressed air tank

Technical data:
Maximum pressure: 1.0 MPa.
Capacity: 1m3

The forming machine is used for forming plates, cutting, trimming, drying and disinfecting them.
The device creates plates by pressing the hydraulic press.
The work process is automatic, there is no need to transfer the mass manual to other positions.
Controlled by a simple to use PLC panel. Produced on European components.
The work streamlines the drainage system.

Application:
It is used in the production of dishes also from wheat bran and other biodegradable products.

Technical data:
Model: DY660X860
Mold size: 660 x 860 mm US 26" x 34"